New to RuneScript? Check out our Introductory Guide! Weather Now equipped with a !weather command, RuneScript can detect how the climate is in your own backyard. Like most weather websites, one would specify their zip code or location, and the bot will automatically retrieve the weather information for the area.
Note: you must use a 5-digit zip code or the nearest town information. You may also use the format Town,State.

Syntax: !Weather <Zip Code/Town, State>
Example: <Emo> !weather 02818
-RuneScript- *** [ WEATHER ]: Weather for North Kingstown, Rhode Island Last updated: 9:20 PM EST on January 21, 2008
-RuneScript- Conditions: Partly Cloudy Temperature: 16.7F/-8.5C Feels like: NA/NA Humidity: 88% Wind: West at 0.0mph/0.0kmh
You can also use the -d parameter to save your weather information so that a simple !weather can be used to find your information.

Example:
<Emo> !weather -d 02818
-RuneScript- *** [ WEATHER ]: Your default weather code has been set to 02818.
<Emo> !weather
-RuneScript- *** [ WEATHER ]: Weather for North Kingstown, Rhode Island Last updated: 7:50 PM EST on January 23, 2008
-RuneScript- Conditions: Overcast Temperature: 41F/5C Feels like: N/A/NA Humidity: N/A% Wind: West at 12mph/18kmh


Note: The information for this command is pulled from Wunderground(Weather Underground), which is a USA based site. Not all international cities/towns will work with this command.
This command's settings may be changed with !set weather.

---